rotary boring/tapping/cutting special machine maintenance is definitely essential, We should attach great importance to the maintenance and maintenance of rotary boring/tapping/cutting special machine. Especially for rotary boring/tapping/cutting special machine operators should be more so, we can not just operate, but ignore the daily maintenance and maintenance of the machine tool.

rotary boring/tapping/cutting special machine is more difficult to use than ordinary machine tools. rotary boring/tapping/cutting special machine is a typical mechatronics product, it involves a wide range of knowledge, that is, the operator should have machine, electricity, hydraulic, gas and other wider professional knowledge; Moreover, because the CNC system in its electrical control system is upgraded and updated relatively quickly, if you do not regularly participate in professional theoretical training, you can not master the application of the new CNC system. Therefore, the quality requirements for operators are very high. To this end, the CNC operators are trained to make them learn the machine principle, performance, lubrication parts and their ways more systematically, laying the foundation for better use of machine tools. At the same time in the use and management of machine tools, develop a series of practical and effective measures.

rotary boring/tapping/cutting special machine needs oil change maintenance, because it is the same as a car, pay attention to the health of the table after buying back, so that dust and iron chips can not enter the track inside, the harm produced in the future is poor accuracy and heavy hand. The operation is very heavy and laborious, so the rotary boring/tapping/cutting special machine should be changed once a month in the early period, once in the next three months of a year, and three times in the first three months. rotary boring/tapping/cutting special machine oil change, CNC lathe track impurities will be reduced, it will flow along the new oil into the oil groove, will not stay in the track, will not scratch the track.

CNC lathe customization manufacturers talk about rotary boring/tapping/cutting special machine maintenance "oil change" matters:

1. Check the lubricating oil level height to ensure machine lubrication.

2. Check whether the coolant in the coolant box is enough, if not, increase it in time.

3. Check the oil level of the pneumatic triplet, which is about 2/3 of the height of the entire tubing. Every day, the water in the pneumatic three-piece oil filter tank is discharged by the drain switch.

4. Check the air pressure, relax the adjustment knob, adjust the pressure according to the principle of right-handed pressurization and left-handed decompression, generally set to 5-7kg/cm2. Pressure switch is generally set to 5kg/cm2, less than 5kg/cm2 alarm, the system appears "LOWAIRPRESSURE" alarm, after the pressure rises, the alarm information disappears.

5. Check the rotary boring/tapping/cutting special machine spindle inner cone hole air blowing is normal, scrub the spindle inner cone hole with clean cotton cloth, and spray light oil.

rotary boring / tapping / cutting special machine https://www.zjshuangzheng.com/Rotary-Table-Intelligent-Assembly-Machine.html